Improving Quality Using The Kano Model in Overcoming Competition in The Service Industry

Meri Andriani, Heri Irawan, Nanda Rizqa Asyura

Abstract


The tight competition in the service industry, especially hospitality, has caused hoteliers to strive to improve service quality. Improving the quality of service is carried out in various ways, one of which is increasing the occupancy rate of hotel rooms. This is different from Hotel X. Hotel X is an old hotel located in Langsa which has experienced a decrease in room occupancy from time to time. The decrease was caused by the service from hotel X that was still not satisfactory to customers. The purpose of this study is to identify customer dissatisfaction with the quality of hotel services and provide design proposals to improve service quality. The method used in this study is the Kano model, which is the model used to identify customer satisfaction, through questionnaires given to customers, statistical tests are used to conduct adequacy tests and data uniformity tests for questionnaire data obtained. Excel and SPSS software are used in statistical tests, Minitab 16 software is used in making coefficient diagrams of customer satisfaction levels. Results and Discussion obtained 21 attributes in the must be a category, 8 attributes in the one-dimensional category, 2 in the attractive category, and 2 in the indifferent category, the attributes which are categorized as one dimensional, attractive, and must be are attributes that are prioritized to improve service quality. In conclusion, 31 attributes are included in customer dissatisfaction with hotel X, one of which is the physical condition of the building with a dissatisfaction value of -3,080. There are 18 attributes as proposed designs in improving service quality, five of which are adding and completing service-related equipment, infrastructure improvement, improvement and development of standard operating procedures (SOP), periodic maintenance and replacement of service support equipment, procurement of housekeeping equipment, cleaning of facilities. and infrastructure, installation of signs, warnings, and information.

Keywords


Canoe Model, Customer Satisfaction, Hospitality Service, Service Quality

Full Text:

PDF

References


H. T. Nguyen, “An application of the Kano model and retail service quality scale to Vietnamese supermarkets,†Int. J. Product. Qual. Manag., vol. 31, no. 2, pp. 189–206, 2020.

M. Andriani and H. Irawan, “Perancangan Sistem Informasi Pemesanan Kamar Hotel Berbasis Website (Web) Menggunakan Data Flow Diagram (Dfd),†Jisi J. Integr. Sist. Ind., vol. 7, no. 2, pp. 111–122, 2020.

N. Y. Goryushkina, D. V. Shkurkin, A. S. Petrenko, S. Y. Demin, and N. S. Yarovaya, “Marketing management in the sphere of hotel and tourist services,†Int. Rev. Manag. Mark., vol. 6, no. 6, pp. 207–213, 2016.

B. L. Cheng, C. C. Gan, B. C. Imrie, and S. Mansori, “Service recovery, customer satisfaction and customer loyalty: evidence from Malaysia’s hotel industry,†Int. J. Qual. Serv. Sci., vol. 11, no. 2, pp. 187–203, 2019.

A. M. Gregory, H. G. Parsa, K. Nusair, D. J. Kwun, and S. Putrevu, “Examining the effects of vacation ownership product attributes on customer satisfaction: An investigation of product purchase and use,†Int. J. Contemp. Hosp. Manag., vol. 27, no. 1, pp. 52–70, 2015.

S.-H. Park, H.-J. Gwon, and Y.-Y. You, “A Study on the Consulting Service Quality using Kano Model,†Indian J. Sci. Technol., vol. 9, no. 43, 2016.

J. L. Jones and M. Shandiz, “Service Quality Expectations: Exploring the Importance of SERVQUAL Dimensions from Different Nonprofit Constituent Groups,†J. Nonprofit Public Sect. Mark., vol. 27, no. 1, pp. 48–69, 2015.

A. A. Razak and M. F. Shamsudin, “The influence of atmospheric experience on Theme Park Tourist’s satisfaction and loyalty in Malaysia,†Int. J. Innov. Creat. Chang., vol. 6, no. 9, pp. 10–20, 2019.

M. F. Shamsudin, N. Nurana, A. Aesya, and M. A. Nabi, “Role of university reputation towards student choice to private universities,†Opcion, vol. 34, no. Special Issue 16, pp. 285–294, 2018.

R. G. Harijith and H. Naduthodi, “Kano Model Customer Satisfaction Analysis of Medical Services,†Int. Res. J. Eng. Technol., vol. 4, no. 6, pp. 1426–1429, 2017.

Y. Liao, C. Yang, and W. Li, “Extension innovation design of product family based on kano requirement model,†Procedia Comput. Sci., vol. 55, no. Itqm, pp. 268–277, 2015.

A. Branea, S. A. Potra, A. P. Pugna, and M. Gaman, “Assessing Relevant Quality Attributes For Designing an Ergonomic Dorm Room Within The Romanian Context,†vol. 64, pp. 135–144, 2021.

S. A. Potra, M. Izvercian, A. P. Pugna, and J. J. Dahlgaard, “The HWWP, a refined IVA-Kano model for designing new delightful products or services,†Total Qual. Manag. Bus. Excell., vol. 28, no. 1–2, pp. 104–117, 2017.

N. Hidayat et al., “Analisis Peningkatan Kualitas Pelayanan Di Perpustakaan Universitas Negeri Padang (Unp) Dengan,†J. Multidiscip. Res. Dev., vol. 1, no. 1, pp. 28–39, 2018.

S. Mote, V. Kulkarni, and D. B. E. Narkhede, “Kano Model application in new service development and Customer satisfaction,†IOSR J. Bus. Manag., vol. 18, no. 08, pp. 10–14, 2016.

G. A. Khaskheli, “A mediation analysis of social media marketing between the relationship of entrepreneurial marketing strategies and the performance of small & medium enterprises in Pakistan,†Indian J. Sci. Technol., vol. 13, no. 29, pp. 2024–2034, 2020.

E. I. Obilor and E. C. Amadi, “Test for significance of Pearson’s correlation coefficient (r),†Int. J. Innov. Math. Stat. Energy Policies, vol. 6, no. 1, pp. 11–23, 2018.

L. J. Cronbach, “Coefficient alpha and the internal structure of tests,†Psychometrika, vol. 16, no. 3, pp. 297–334, 1951.

M. Jesica, G. Testiana, and S. Rahayu, “Analisis Pengembangan Website Menggunakan Metode Kano ( Studi Kasus : BRSPDF Budi Perkasa Palembang ),†vol. 10, no. 02, 2019.




DOI: https://doi.org/10.52088/ijesty.v1i4.145

Article Metrics

Abstract view : 638 times
PDF - 347 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Meri Andriani, Heri Irawan, Nanda Rizqa Asyura

International Journal of Engineering, Science and Information Technology (IJESTY) eISSN 2775-2674