An Analysis and Survey of Polishing Dents Warehouse Inventory Development

Johni S Pasaribu

Abstract


PT Setia Kiji Reed (SKR) was established in 1991, with its Jl address. Rancaekek Km. 24.5, Linggar, Kec. Rancaekek, Bandung Regency, West Java 40394 is a company that already uses computer technology in carrying out its business processes. This company is a joint venture between Japan (KIJI Reed Co. Ltd) and Indonesia, with business activities in the textile industry such as manufacturing and sales of reeds for weaving looms and material suppliers for air-jet reeds. The company has three divisions: Wirecut, Polishing Dents, and Reed Production. However, recording incoming and outgoing goods transactions at the Polishing Dents warehouse is not fully recorded in one application but is stored in various databases. Each punch-out or raw material from the supplier is stored in the warehouse as a raw material., These goods are processed through the production process into finished goods, held in the warehouse as finished goods for export. The data obtained in this study were collected by interview, observation, and literature study. Software development uses the Rapid Application Development (RAD) methodology and a system design approach through the Object-Oriented Approach with the Unified Modeling Language (UML). The results of this study are an inventory management information system that can support and manage inventory processes in the warehouse, such as controlling and monitoring goods, maintaining goods returns, assigning suppliers, and reporting.

Keywords


Warehouse, Inventory, Unified Modeling Language, Rapid Application Development

Full Text:

PDF

References


J. S. Pasaribu, “Development of a Web-Based Inventory Information System,” Int. J. Eng. Sci. InformationTechnology, vol. 1, no. 2, pp. 24–31, 2021, DOI: 10.52088/majesty.v1i2.51.

A. Pasaribu, J.S. & Taryanto, “Implementasi Strategi E-Marketing Berbasis Web (Studi Kasus Perusahaan Katering dan Dekorasi),” E-Komtek, vol. 2 no 1, pp. 10–22, 2018.

J. S. Pasaribu, “Penerapan Framework YII Metoda MVC Dalam Pembangunan Sistem PPDB Berbasis Web di SMP BPPI Baleendah Kabupaten Bandung,” JITTER J. Ilm. Teknol. Inf. Terap., vol. 3 no. 2, 2017.

D. Riyan Rizaldi, A. Doyan, Z. Fatimah, M. Zaenudin, and M. Zaini, “Strategies to Improve Teacher Ability in Using The Madrasah E-Learning Application During the COVID-19 Pandemic,” Int. J. Eng. Sci. Inf. Technol., vol. 1, no. 2, 2021, DOI: 10.52088/majesty.v1i2.47.

I. Myers, David; Dalgety, Alison & Avramides, “The Arches Heritage Inventory and Management System for the Protection of Cultural Resources,” J. Cult. Heart. Manag. Sustain. Dev., vol. 6 no. 2, pp. 213–224, 2016.

J. S Pasaribu, “Development of a Web-Based Inventory Information System,” Int. J. Eng. Sci. Inf. Technol., vol. 1, no. 2, 2021, DOI: 10.52088/majesty.v1i2.51.

D. 2019. Fadillah, A. P., & Fitriana, “Design of Project Data Management Information System,” IOP Conf. Ser. Mater. Sci. Eng., vol. 662, p. 022014, 2019.

R. R. J. Mwansele, H.A., Sichona, F.J., Akarro, “Determination of Inventory Control Policies at Urafiki Textile Mills Co Ltd in Dar-es-Salaam, Tanzania,” Bus. Econ. J., vol. 2011, pp. 1–9, 2011.

P. E. Mayilsamy, T. and Kumar, “Implementation of E-Kanban System Design in Inventory Management,” Int. J. Sci. Res. Publ., vol. Volume 4, no. 9, pp. 1–4, 2014.

D. N. Dobler, D.W. and Burt, Purchasing and Supply Management, 6th ed. McGraw Hill International Edition, 2006.

W. I. Ogbo, A.I. and Ukpere, “The Impact of Effective Inventory Control Management on Organisational Performance: A Study of 7up Bottling Company Nile Mile Enugu, Nigeria,” Mediterr. J. Soc. Sci., vol. 5, no. 10, pp. 109–118, 2014, doi: 10.5901/mjss.2014.v5n10p109.

K. . G. Madamidola, O.A.; Daramola, O.A. and Akintola, “Web-Based Intelligent Inventory Management System,” IJTSRD - Int. J. Trend Sci. Res. Dev., vol. 1(4), 2017.

Sugiyono, Metode Penelitian Kuantitatif, Kualitatif, dan R&D. Bandung: CV. Alfabeta, 2014.

B. Dwi Cahyono and D. Sulastri, “Development Of Electrical Installation Learning Media With Delphi Language,” Int. J. Eng. Sci. Inf. Technol., vol. 1, no. 3, 2021, DOI: 10.52088/majesty.v1i3.81.

R. S. Pressman, Rekayasa Perangkat Lunak (Pendekatan Praktisi) Buku 1, 7th ed. Yogyakarta: Andi Offset, 2012.




DOI: https://doi.org/10.52088/ijesty.v2i2.242

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Johni S. Pasaribu

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

International Journal of Engineering, Science and Information Technology (IJESTY) eISSN 2775-2674