Implementation of Organic and Inorganic Waste Selection System Based on Internet of Things Using MQTT Protocol at Abby Lhokseumawe Hospital

Rina Julita, Eva Darnila, Risawandi Risawandi

Abstract


The waste sorting system designed for Abby Hospital in Lhokseumawe aims to improve the efficiency and effectiveness of waste management by automatically separating organic and inorganic materials. This system integrates Proximity sensors as the primary detectors, capable of detecting organic objects within a spatial range of 4 cm and inorganic objects within a range of 5 cm. The main feature of this system is its ability to automatically sort waste, which helps reduce the potential for human error in waste categorization and improve operational efficiency in the waste disposal process. During the testing phase, which focuses on assessing the trash bin's capacity when complete, the system uses ultrasonic sensors to measure and monitor the waste filling levels. The test results show an average data transmission delay of 445.33 ms, which is within the acceptable tolerance for this system. Additionally, the prototype is equipped with an operational status notification feature for users. This notification is delivered with an average delay of just 402.5 ms, ensuring that system status information is provided to users in real time. The combination of sensor detection precision and response speed in the waste sorting process highlights the system's effectiveness in improving waste management at the hospital. This system is expected to support the hospital's efforts in maintaining a clean environment and contribute to a more environmentally friendly and organized waste management program.


Keywords


Proximity, Ultrasonic, Internet of Things, Blynk, Organic & Inorganic

Full Text:

PDF

References


M. Ula, R. Tjut Adek, B. Bustami, S. Mulaesyi, and M. Bayu Juhri, “A Monitoring System for Aquaponics Based on Internet of Things,” Proceedings of Malikussaleh International Conference on Multidisciplinary Studies (MICoMS), vol. 3, p. 00008, Dec. 2022, doi: 10.29103/micoms.v3i.49.

M. Rahmadan and C. E. Gunawan, “PERANCANGAN DATA FLOW DIAGRAM APLIKASI TABUNGAN SAMPAH PT PUSRI PALEMBANG,” 2024.

P. Prasetyawan, S. Samsugi, and R. Prabowo, “Internet of Thing Menggunakan Firebase dan Nodemcu untuk Helm Pintar,” Jurnal ELTIKOM, vol. 5, no. 1, pp. 32–39, Mar. 2021, doi: 10.31961/eltikom.v5i1.239.

I. Pahendra and E. Darnila, “CO2 (Carbon Dioxide) Metric Monitoring Tool Based on Internet of Things (IoT),” 2020. [Online]. Available: https://iocscience.org/ejournal/index.php/mantik

R. A. Radouan Ait Mouha, “Internet of Things (IoT),” Journal of Data Analysis and Information Processing, vol. 09, no. 02, pp. 77–101, 2021, doi: 10.4236/jdaip.2021.92006.

R. Wulandari, M. R. Ariwibowo, T. Taryo, and G. Ananda, “Design Smart Trash Based On the Inductive Proximity Sensor,” International Journal of Multidisciplinary Approach Research and Science, vol. 2, no. 01, pp. 194–200, Nov. 2023, doi: 10.59653/ijmars.v2i01.394.

P. Prasetyawan, S. Samsugi, and R. Prabowo, “Internet of Thing Menggunakan Firebase dan Nodemcu untuk Helm Pintar,” Jurnal ELTIKOM, vol. 5, no. 1, pp. 32–39, Mar. 2021, doi: 10.31961/eltikom.v5i1.239.

D. Erawadi, R. Berlianti, and V. Andrivanly, “International Journal of Innovation in Mechanical Construction and Energy Design and Construction of a Fish Seed Counting Tool Using Infrared Proximity Sensors Based on PLC and HMI,” INTERNATIONAL JOURNAL OF INNOVATION IN MECHANICAL CONSTRUCTION AND ENERGY, vol. 1, no. 2, pp. 102–114, 2024.

A. Aldi, “RANCANG BANGUN SISTEM KENDALI INTENSITAS CAHAYA LAMPU RUANGAN MENGGUNAKAN FUZZY LOGIC BERBASIS MIKROKONTROLER ARDUINO MEGA,” Jurnal Informatika dan Teknik Elektro Terapan, vol. 12, no. 1, Jan. 2024, doi: 10.23960/jitet.v12i1.3642.

A. C. Gheorghe and C. I. Stoica, “Wireless Weather Station Using Arduino Mega and Arduino Nano,” The Scientific Bulletin of Electrical Engineering Faculty, vol. 21, no. 1, pp. 35–38, Apr. 2021, doi: 10.2478/sbeef-2021-0008.

Feridad Ainul Yaqin, Diana Rahmawati, Achmad Fiqih Ibadillah, and Kunto Aji Wibisono, “Perancangan Power Supply Switching Dengan Power Factor Correction (PFC) Untuk Mengoptimalkan Daya Output Dan Pengaman Proteksi Hubung Singkat,” Jurnal Arus Elektro Indonesia (JAEI), 2021.

J. Williamsson, N. Costa, V. Santén, and S. Rogerson, “Barriers and Drivers to the Implementation of Onshore Power Supply—A Literature Review,” May 01, 2022, MDPI. doi: 10.3390/su14106072.

T. Sulistyorini, N. Sofi, and E. Sova, “PEMANFAATAN NODEMCU ESP8266 BERBASIS ANDROID (BLYNK) SEBAGAI ALAT ALAT MEMATIKAN DAN MENGHIDUPKAN LAMPU,” JUIT, vol. 1, no. 3, 2022.

X. Shi, C. Tan, F. Dong, and J. Escudero, “Flow rate measurement of oil-gas-water wavy flow through a combined electrical and ultrasonic sensor,” Chemical Engineering Journal, vol. 427, Jan. 2022, doi: 10.1016/j.cej.2021.131982.

R. Dias Valentin, M. Ayu Desmita, and A. Alawiyah, “Implementasi Sensor Ultrasonik Berbasis Mikrokontroler Untuk Sistem Peringatan Dini Banjir,” Jimel, vol. 2, no. 2, pp. 2723–598, 2021, doi: 10.33365/jimel.v1i1.

Aulia Alfiana Yufrida, Lucky Putri Rahayu, and Dwiky Fajri Syahbana, “Implementasi Kontrol Torsi Motor Servo Menggunakan Metode PI pada Sistem Automatic Pallet Dispenser,” JURNAL TEKNIK ITS, 2021.

Y. Gao, M. Doppelbauer, J. Ou, and R. Qu, “Design of a Double-Side Flux Modulation Permanent Magnet Machine for Servo Application,” IEEE J Emerg Sel Top Power Electron, vol. 10, no. 2, pp. 1671–1682, Apr. 2022, doi: 10.1109/JESTPE.2021.3105557.

Y.- Yanti, “SISTEM MONITORING KEAMANAN KANTOR BERBASIS ANDROID MENGGUNAKAN MODUL WIRELESS ESP-01,” Jurnal Informatika dan Teknik Elektro Terapan, vol. 12, no. 1, Jan. 2024, doi: 10.23960/jitet.v12i1.3734.

Julham, P. H. Putra, and M. Ramli, “Utilization of Service Set Identifiers (SSID) with ESP-01 in Wireless Networks for Lighting Automation,” Electronic Integrated Computer Algorithm Journal, vol. 2, no. 1, pp. 9–14, Oct. 2024, doi: 10.62123/enigma.v2i1.29.

N. Latifah Husni, R. Vira, D. Andika, A. S. Handayani, and S. Rasyad, “Monitoring dan Analisis Kualitas Kinerja Jaringan Protokol Message Queue Telemetry Transport pada G-Bot (Garbage Robot),” vol. 7, no. 1, 2022, doi: 10.31851/ampere.




DOI: https://doi.org/10.52088/ijesty.v5i2.826

Article Metrics

Abstract view : 0 times
PDF - 0 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2025 Rina Julita, Eva Darnila, Risawandi

International Journal of Engineering, Science and Information Technology (IJESTY) eISSN 2775-2674