The Study Strength of Laminated Bamboo Pedestal Using Bolted Joints

Dewi Purnama Sari, Andi Yusra, Zakia Zakia, Sri Kurniati

Abstract


Bamboo has properties that vary from the joint. This study aims to investigate the effect of diameter change on the strength test of laminated bamboo cones, the degree of damage that occurs in laminated bamboo specimens, and the connection tool. The purpose of this study is to investigate the effect of diameter change on the strength test of laminated bamboo cones, to investigate the degree of damage that occurs in laminated bamboo specimens, and to determine the static load that can be withstood. Deformation characteristics under working load according to [1]. The method used is the half-hole method. In this study, we found that changes in bolt diameter affected the average pivot strength (Fe), with stress increasing with increasing bolt diameter. This study was conducted to determine the properties of the static load that can be endured and the deformation that occurs in laminated bamboo under load. To get the data, we need to do laboratory tests. Bamboo pivot strength test to find Fe max and Fe 5%. A long tube with a width of 39.5 cm, a height of 45 cm, and a length of 450 cm. During the pivot strength test, the broken sample had a zigzag change of 10 mm in diameter. As a result of the strength test of laminated bamboo sticks, the average maximum Fe values of screws with diameters of 8 mm and 10 mm were 85584 MPa and 91930 MPa, respectively. The average (Fe 5%) values for 8 mm and 10 mm diameter screws are 74.819 MPa and 65.594 MPa.

Keywords


Bamboo Laminated, Strong Pile, Bolts, Deformations, Half Hole Method

Full Text:

PDF

References


College of Civil Engineering, Nanjing Forestry University et al., “A review of mechanical behavior of structural laminated bamboo lumber,†Sustain. Struct., vol. 1, no. 1, 2021, doi: 10.54113/j.sust.2021.000004.

D. E. Breyer and D. E. Breyer, Eds., Design of wood structures--ASD/LRFD, 6th ed. New York: McGraw-Hill, 2007.

Y. A. Pranata, B. Suryoatmono, and J. A. Tjondro, “KUAT LENTUR BALOK LAMINASI-BAUT KAYU INDONESIA,†2011.

A. Priyanto and I. Yasin, “PEMANFAATAN LAMINASI BAMBU PETUNG UNTUK BAHAN BANGUNAN,†Sci. Tech J. Ilmu Pengetah. Dan Teknol., vol. 5, no. 2, pp. 23–39, Oct. 2019, doi: 10.30738/jst.v5i2.5803.

N. Palaeowati, A. Awaludin, and S. Siswosukarto, “Lateral Load Resistance of Laminated Veneer Lumber Sengonwooden Joints with Wooden Dowels,†Makara J. Technol., vol. 18, no. 3, p. 143, Jan. 2015, doi: 10.7454/mst.v18i3.2958.

A. Priyanto and I. Yasin, “PEMANFAATAN LAMINASI BAMBU PETUNG UNTUK BAHAN BANGUNAN,†Sci. Tech J. Ilmu Pengetah. Dan Teknol., vol. 5, no. 2, pp. 23–39, Oct. 2019, doi: 10.30738/jst.v5i2.5803.

N. Palaeowati, A. Awaludin, and S. Siswosukarto, “Lateral Load Resistance of Laminated Veneer Lumber Sengonwooden Joints with Wooden Dowels,†Makara J. Technol., vol. 18, no. 3, p. 143, Jan. 2015, doi: 10.7454/mst.v18i3.2958.

Y. Xiao, M. Inoue, and S. K. Paudel, “Modern Bamboo Structuresâ€.

E. T. Akinlabi, K. Anane-Fenin, and D. R. Akwada, Bamboo. Cham: Springer International Publishing, 2017. doi: 10.1007/978-3-319-56808-9.

F. W. Owusu, S. L. Tekpetey, E. Appiah-Kubi, C. Essien, J. K. Appiah, and F. Boakye, “Ripping and planing characteristics of some exotic bamboo species grown in Ghana,†J. Bamboo Rattan.

A. Firdaus, B. Prastyatama, A. Sagara, and R. N. Wirabuana, “Deployable bamboo structure project: A building life-cycle report,†presented at the PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON CONSTRUCTION AND BUILDING ENGINEERING (ICONBUILD) 2017: Smart Construction Towards Global Challenges, Palembang, Indonesia, 2017, p. 030002. doi: 10.1063/1.5011509.

D20 Committee, “Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics,†ASTM International. doi: 10.1520/D0256-10.

D30 Committee, “Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method,†ASTM International. doi: 10.1520/D5379_D5379M-12.

I. M. Sulastiningsih, S. Ruhendi, Muh. Y. Massijaya, I. W. Darmawan, and A. Santoso, “Effects of Nodes on the Properties of Lam-inated Bamboo Lumber,†Wood Res. J., vol. 4, no. 1, pp. 19–24, Apr. 2017, doi: 10.51850/wrj.2013.4.1.19-24.

P. Manik, S. Samuel, T. Tuswan, S. Jokosisworo, and R. K. Nadapdap, “Mechanical properties of laminated bamboo composite as a sustainable green material for fishing vessel: Correlation of layer configuration in various mechanical tests,†J. Mech. Behav. Mater., vol. 31, no. 1, pp. 673–690, Aug. 2022, doi: 10.1515/jmbm-2022-0075.

T. A. Amatosa, M. E. Loretero, R. B. Santos, and M. B. Giduquio, “Analysis of Sea-water Treated Laminated Bamboo Composite for Structural Application,†Nat. Environ. Pollut. Technol., vol. 18, no. 1, 2019.

Y. Hu et al., “Manufacturing and Characterization of Wide-Bundle Bamboo Scrimber: A Comparison with Other Engineered Bamboo Composites,†Materials, vol. 15, no. 21, p. 7518, Oct. 2022, doi: 10.3390/ma15217518.

K. Rassiah, M. M. H. Megat Ahmad, A. Ali, A. H. Abdullah, and S. Nagapan, “Mechanical Properties of Layered Laminated Woven Bamboo Gigantochloa Scortechinii/Epoxy Composites,†J. Polym. Environ., vol. 26, no. 4, pp. 1328–1342, Apr. 2018, doi: 10.1007/s10924-017-1040-3.

E. Suhaimi and K. B. Awang, “Bamboo Properties and Suitability as a Replacement for Wood,†2016.

P. Luna, A. M. Olarte, and C. Takeuchi, “Theoretical and experimental analysis of structural joints of glued laminated pressed bamboo guadua for a housing project,†DYNA, vol. 81, no. 184, p. 110, Apr. 2014, doi: 10.15446/dyna.v81n184.37414.

N. P. N. Pradhan and E. G. Dimitrakopoulos, “Pilot Study on Capacity-Based Design of Multiculm Bamboo Axial Members with Dowel-Type Connections,†J. Struct. Eng., vol. 147, no. 5, p. 04021040, May 2021, doi: 10.1061/(ASCE)ST.1943-541X.0002995.

A. Awaludin, W. Smittakorn, T. Hirai, and T. Hayashikawa, “Bearing properties of Shorea obtusa beneath a laterally loaded bolt,†J. Wood Sci., vol. 53, no. 3, pp. 204–210, Jun. 2007, doi: 10.1007/s10086-006-0842-z.




DOI: https://doi.org/10.52088/ijesty.v3i1.421

Article Metrics

Abstract view : 0 times
PDF - 0 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Dewi Purnama Sari, Andi Yusra, Zakia, Sri Kurniati

International Journal of Engineering, Science and Information Technology (IJESTY) eISSN 2775-2674