Simulation of Opening Angle of Archimedes Wind Turbine Design Based on the Fibonacci Series

Eva Herraprastanti, Widianto Agung Saputro

Abstract


The configuration of new type of turbine is the Archimedes wind turbine with a spiral structure whose design is inspired by logarithmic spirals. This type of wind turbine uses lift and drag to harness the kinetic energy of the wind. The eccentric design has aerodynamic characteristics that have been the focus of previous research. The design is made from the arrangement of the Fibonacci sequence (1x1, 2x2, 3x3, 5x5, 8x8) or commonly known as the golden ratio. This study aims to analyze the coefficient of lift (CL) and coefficient of drag (CD) with variations opening angle of 35°, 45°, 65°, air fluid, turbulent flow, Re 1200, pressure distribution 1 atm, wind speed 5, 5 and 15 m/s. The results is at wind speed of 5.5 m/s, an angle of 35°, the CL value is 1.07E+02, the CD value is 4.02E+04. At wind speed of 5.5 m/s, an angle of 45°, the CL value is 1.08E+04, the CD value is 1.77E+01. At wind speed  of 5.5 m/s, an angle of 65°, the CL value is 1.84E+06, the CD value is 3.68E+04. At wind speed  of 15 m/s, an angle of 35°, the CL value is 2.20E+03, the CD value is 9.76E+02. At wind speed  of 15 m/s, an angle of 45°, the CL value is 5.51E+04, the CD value is 4.12E+02. At wind speed  of 15 m/s, an angle of 65°, the CL value is 5.96E+01, the CD value is 1.33E+03. Based on this, it can be concluded that at wind speed  of 5.5 m/s the higher the opening angle, the higher CL produced. At wind speed  of 15 m/s the larger the opening angle the CD increases. This is because the higher the angle, the more it receives sweeps or catches the wind. While the unstable value generated in this simulation is generally a weakness in the wind turbine design.


Keywords


Archimedes Wind Turbine, Opening Angle Lift, Drag, Fibonacci

Full Text:

PDF

References


Y. Patil, “Design, Fabrication And Analysis Of Fibonacci Spiral Horizontal Axis Wind Turbine,†Int. J. Aerosp. Mech. Eng., vol. 5, no. 2, pp. 19–22, 2018.

A. T. Mustafa and H. A. Jaleel, “A comparison study between Archimedes spiral turbine and propeller turbine with wind attack angle effect,†AIP Conf. Proc., vol. 2213, no. March, 2020, doi: 10.1063/5.0000144.

B. Munson, “Mekanika Fluida,†Erlangga, no. Jakarta, pp. 1–50, 2002.

N. Sylvia, Y. Yunardi, H. Husni, and A. Muslim, “Simulation of CO2 Gas Adsorption Process Flow at Cyclone Gas Outlet in Palm Oil Mills Using Computation Fluid Dynamic Simulation,†Int. J. Eng. Sci. Inf. Technol., vol. 1, no. 3, 2021, doi: 10.52088/ijesty.v1i3.112.

S. K. Mishra, “Fitting a Logarithmic Spiral to Empirical Data With Displaced Origin,†SSRN Electron. J., no. November, 2011, doi: 10.2139/ssrn.897863.

R. Rinaldy and M. Ikhsan, “Determinant Analysis Of Conflict On Project Results In Aceh Province,†Int. J. Eng. Sci. Inf. Technol., vol. 1, no. 1, 2021, doi: 10.52088/ijesty.v1i1.37.

Y. Yurike, Y. Yonariza, and R. Febriamansyah, “Patterns of Forest Encroachment Behavior Based on Characteristics of Immigrants and Local Communities,†Int. J. Eng. Sci. Inf. Technol., vol. 1, no. 4, 2021, doi: 10.52088/ijesty.v1i4.175.

S. Sinha, “The Fibonacci Numbers and Its Amazing Applications,†Int. J. Eng. Sci. Invent., vol. 6, no. 9, pp. 7–14, 2017.

A. R. Watson, “The Golden Relationships: An Exploration of Fibonacci Numbers and Phi,†pp. 5–61, 2017.

T. Imankulov, B. Daribayev, and S. Mukhambetzhanov, “Comparative analysis of parallel algorithms for solving oil recovery problem using cuda and opencl,†Int. J. Nonlinear Anal. Appl., vol. 12, no. 1, 2021, doi: 10.22075/IJNAA.2021.4809.

N. Minarova, “The Fibonacci Sequence: Nature’s Little Secret,†Cris - Bull. Cent. Res. Interdiscip. Study, vol. 2014, no. 1, pp. 7–17, 2014, doi: 10.2478/cris-2014-0001.

R. H. Buti and A. K. Sachit, “On subclass of analytic univalent functions defined by fractional differ-integral operator i,†Int. J. Nonlinear Anal. Appl., vol. 12, no. Special Issue, 2021, doi: 10.22075/IJNAA.2021.4844.

D. Abdullah et al., “Expert System Diagnosing Disease of Honey Guava Using Bayes Method,†in Journal of Physics: Conference Series, 2019, doi: 10.1088/1742-6596/1361/1/012054.

U. Nepal, S. Sapkota, A. Bhattarai, and H. Prasad Bashyal, “Design, CFD Analysis and Modelling of Archimedean-Spiral type Wind Turbine,†pp. 1–9, 2019.

D. Kumar, “Power System Restoration Using Multilayer Perceptron,†Int. J. Eng. Sci. Inf. Technol., vol. 1, no. 1, 2021, doi: 10.52088/ijesty.v1i1.35.

M. Burazer, “UNIVERSITY OF SPLIT FACULTY OF ELECTRICAL ENGINEERING , MECHANICAL ENGINEERING AND NAVAL ARCHITECTURE GEOMETRIC MODELLING OF Miroslav Burazer-Turko Archimedes spiral wind turbine,†no. December, pp. 2–4, 2015.

L. Ahmad, “Gerak-Sayap-Kelelawar-Bisa-Simpan-Energi-untuk-Terbang-Okezone-techno.†2012.

G. A. Feldhamer, L. C. Drickamer, S. H. Vessey, J. F. Merritt, and C. Krajewski, Adaptation, Diversity, Ecology Fourth Edition. 2015.

Vandha, “Menguak-Rahasia-Kelelawar-Selamat-Datang-di-Blog-Pandapotan-Harahap.†2013.

H. Zarkasy, “Mission-not-Impossible-Cara-Lebah-Terbang-yang-Memukau.†2021.

S. Nurcahyadi, “AIRFOIL SIMETRIS TERHADAP KOEFISIEN ANGKAT,†vol. 11, no. 1, pp. 110–124, 2008.




DOI: https://doi.org/10.52088/ijesty.v2i1.192

Article Metrics

Abstract view : 302 times
PDF - 326 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Eva Herraprastanti, Widianto Agung Saputro

International Journal of Engineering, Science and Information Technology (IJESTY) eISSN 2775-2674