The Effect of Natural Fiber Percentage on the Tensile Strength of Paper Using ANOVA

Reza Syahputra, Muhammad Sayuti, Fatimah Fatimah, Sri Mutia

Abstract


Paper is generally made of cellulose fibers derived from wood raw materials. Increased demand for production will have an impact on forest exploitation which can lead to environmental stability. Alternative natural fibers containing cellulose fiber are biomass waste such as Galangal Stems (Alpinia Galanga), Pineapple Leaves (Ananas Cosmosus), Banana Stems (Musa Paradisiaca), and others. The use of natural fibers can reduce the exploitation of wood as a raw material for paper. The purpose of this study was to determine the effect of natural fibers consisting of galangal stems, pineapple leaves, banana contains, and waste paper on the tensile strength of paper using ANOVA. The ratio of the percentage of fiber passed is galangal stems 50:10 and 50:40, pineapple leaves 50:10 and 50:40, banana contains 50:10 and 50:40, and waste paper 100% or without comparison. Tensile strength was carried out according to ASTM-D638, then data processing was carried out using the One Way ANOVA method. The results showed that the highest tensile strength value of banana stem paper and waste paper with a ratio of 50:10 was obtained at 7.04262 MPa resulting in the best tensile strength compared to other fibers. Factors that affect the tensile strength are the length of the fiber, and the bonds between the fibers are related to the fiber content. The results of this study concluded that the greater the number of material components in the manufacture of recycled paper, the greater the tensile strength of the report produced.


Keywords


Galangal Stem, Pineapple Leaf, Banana Stem, Anova, Tensile Strength

Full Text:

PDF

References


ASTM-D638. (2014). Standard test Method for Tensile Properties of Plastics. In American Society for Testing Materials. https://doi.org/10.1520/D0638-14

Asngad, A., & Syalala, Y. (2018). Kekuatan Tarik dan Kekuatan Sobek Kertas dari Alang-Alang Melalui Proses Organosolv dengan Pelarut Etanol dan Lama Pemasakan Yang Berbeda. Seminar Nasional Pendidikan Biologi Dan Saintek III, (2011), 99–106.

Yosephine, A., Gala, V., Ayucitra, A., & Retnoningtyas, E. S. (2012). Pemanfaatan Ampas Tebu dan Kulit Pisang dalam Pembuatan Kertas Serat Campuran. Jurnal Teknik Kimia Indonesia, 11(2), 94–100.

Dahlan, M. H. (2011). Pengolahan Limbah Kertas Menjadi Pulp sebagai Bahan Pengemas Produk Agroindustri. Prosiding Semi-nar Nasional AVoER 3, 278–282. Palembang. Li-An’Amie, L. N., & Nugraha, A. (2014). Pemanfaatan Limbah Ampas Tebu Melalui Desain Produk Perlengkapan Rumah. Tingkat Sarjana Senirupa Dan Desain, (1), 1–7

Pratama, M. (2016). Identifikasi Sifat Fisika-Mekanik Kertas Untuk Distribusi Produk Agroindustri. Jurnal Agroindustri Halal, 2(2), 064–072.

Adriani LD., Rohanah A., dan Harahap LA. 2017. Karakteristik Kertas Berbahan Baku Kulit Durian Dan Sampah Kertas Perkantoran. J. Rekayasa Pangan dan Pert., 5(1): 215-219.

Munashifah Zl., Kasjono HS., dan Suwerda B. 2018. Pemanfaatan Kertas Bekas, Serabut Kelapa (Cocos nucifera) dan Kulit Sing-kong (Manihot utilissima) Untuk Pembuatan Kertas Daur Ulang. Jurnal Teknologi Kesehatan, 14(2): 65-70

Anupam K.; Sharma A. K.; Lal P. S.; Bist V.. Physicochemical, morphological, and anatomical properties of plant fibers used for pulp and papermaking. Fiber Plants; Springer: Cham, 2016; pp 235–248

Ferdous T.; Quaiyyum M. A.; Salam A.; Jahan M. S. Pulping of bagasse (Saccrarumofficinarum), kash (Saccharumspontaneum) and corn stalks (Zea mays). Curr. Res.Green Sustain. Chem. 2020, 3, 100017. 10.1016/j.crgsc.2020.100017

Awang, Mohamad., Chik, Mohd Syahrizul Binti Mustapha., Rohani Noraaini, Ali. (2022). Utilization of Agro-Waste A. galanga Natural Fibers in Composites, Advances in Chemical, Material and Metallurgical Engineering, (634) 1139-1142

. Sri Hastuti Firman Muris, dan Subaer. (2015). Studi Sifat Mekanik Dan Morfologi Komposit Serat Daun Nanas-Epoxy Ditinjau Dari Fraksi Massa Dengan Orientasi Serat Acak, Jurnal Sains dan Pendidikan Fisika. 11 (2), 185 – 191

Alex Kesuma, Nina Djustiana, Yanwar Faza, Renny Febrida, Elin Karlina. (2017). Uji nilai kekuatan tarik serat pelepah pisang (Musa paradisiaca) sebagai bahan alternatif benang gigi biodegradable 1(2), 135-138

Sundari, E. M., Apriani, W., & Suhendra, S. (2020). Uji Kekuatan Tarik Kertas Daur Ulang Campuran. AME (Aplikasi Mekanika dan Energi): Jurnal Ilmiah Teknik Mesin 6 (1), 28-33.

Syafiisab, A.A. (2010). Pengaruh Komposit Core Berbasis Limbah Kertas, dengan Pencampur Sekam Padi dan Serabut Kelapa Terhadap Kekuatan Bending Panel. Universitas Sebelas Maret, Solo.

Ahmad, A. R., Saftyaningsih, K. A. (2013). Pemanfaatan Hasil Pengolahan Limbah Kertas Pada Produk Tas Dengan Teknik Paper Holding. Jurnal Tingkat Sarjana Bidang Seni rupa Dan Desain. Program Studi Sarjana Kriya Tekstil Fakultas Seni Rupa dan Desain (FSRD), ITB, Bandung.

Indah Widiastuti, Holam Cahya Saputra, Sandy Sidik Wisnu Kusuma and Budi Harjanto. (2022). Mechanical and thermal properties of recycled high-density polyethylene/bamboo with different fiber loadings, Open Engineering; 12: 151–156

Sulaiman, S., Alajmi, .M.S., Wan Isahak, W.N., Yusuf, M., Sayuti, M., 2022. Dry Milling Machining: Optimization of Cutting Parameters Affecting Surface Roughness of Aluminum 6061 using the Taguchi Method. International Journal of Technology. Volume 13(1), pp. 58-68

Furqon. 2009. Statistika Terapan untuk Penelitian. Cetakan ketujuh. ALFABETA: Bandung.

Riduwan.2008.Dasar-dasar Statistika.Bandung:Alfabeta

Sudjana.1996.Metoda Statistika.Bandung:Tarsito Bandung

Usman,Husaini.2006.Pengantar Statistika.Jakarta:PT Bumi Aksar




DOI: https://doi.org/10.52088/ijesty.v3i2.448

Article Metrics

Abstract view : 0 times
PDF - 0 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Reza Syahputra, Muhammad Sayuti, Fatimah, Sri Mutia

International Journal of Engineering, Science and Information Technology (IJESTY) eISSN 2775-2674