Moringa Leaf Dryer Oven System Using Fuzzy Logic Method

Yusril fauzan, Kartika Kartika

Abstract


Moringa trees are often planted as living fences and along rice fields or paddy fields, and they also function as green plants. In addition, Moringa leaves are also known as an efficacious medicinal plant by utilizing all parts of the Moringa plant, starting from the bark, seeds, and leaves to the roots and undergoing processing operations such as drying, wilting and enzymatic oxidation. The processing of Moringa goes is carried out with a drying process that aims to speed up the processing of Moringa leaves. Tests on drying Moringa leaves are carried out in 2 ways, namely drying without using controls and drying using fuzzy rules, then, from the two tests, a comparison will be made, and conclusions will be drawn. This drying was carried out to determine how much weight loss was in dried Moringa leaves using fuzzy control with a temperature of 60 °C. The overall test results for Moringa leaves were carried out with two tests. Namely, the same results will be obtained from 180-gram Moringa leaves at 60°C and 180-gram Moringa leaves at 50°C. Temperature and time with a decrease in the percentage of age by 50% using fuzzy control. This system is supported by a type k thermocouple temperature sensor, load cell sensor, tubular heater, fan, solid state relay, keypad, I2C LCD, and Arduino mega. Two input variables must be controlled in a fish dryer: temperature and weight. At variable temperatures, the input is a type k thermocouple sensor. The output is an SSR that controls the tube heater so that the temperature of the fish dryer matches the set-point temperature. The fuzzy logic method controls the temperature when drying fish does not exceed the set point temperature.


Keywords


Moringa Trees, Arduino Mega, Heater, Load Cell

Full Text:

PDF

References


M. A. Wahyudi and J. Septaryanto, “Pelatihan Pembuatan Kelor Celup untuk Kesehaan Tubuh,” vol. 2, no. 1, pp. 1–6, 2020, doi: 10.36312/sasambo.v1i2.127.

N. Hidayah, Muris, and Subaer, “Studi tentang pemanfaatan karbon aktif tempurung kelapa pada proses desalinasi air laut dengan teknik reverse osmosis,” vol. 2015, no. April, pp. 93–97, 2015.

F. El-Zaatari, S. Siswoko, and A. Murtono, “Implementasi Fuzzy Logic Pada Pengontrolan Suhu Dalam Proses Pengeringan Daun Kelor (Moringa Oleifera) Sebagai Teh Herbal,” J. Elektron. dan Otomasi Ind., vol. 7, no. 2, p. 29, 2021, doi: 10.33795/elkolind.v7i2.191.

I. Kurniawati and M. Fitriyya, “Characteristics of Moringa Leaf Flour with Sunlight Drying Method,” J. Gizi dan Pangan, vol. 1, pp. 238–243, 2018.

P. M. Scor, U. Mengukur, and F. Supply, “Fakultas Teknologi Industri Universitas Pembangunan Nasional ‘ Veteran ’ Jawa Timur,” 2011.

A. Hisyam, “Analisis Perpindahan Panas Pada Oven Electric Heaters Oven for Drying,” Tugas Akhir, 2016.

A. Vachlepi and M. Purbaya, “Perbandingan Cara Pengeringan Menggunakan Oven Laboratorium Dan Alat Pengering Skala Pabrik Terhadap Kadar Karet Kering (Kkk),” J. Stand., vol. 19, no. 3, p. 265, 2018, doi: 10.31153/js.v19i3.589.

E. Z. R. Hakim, H. Hasan, and Syukriyadin#, “Perancangan Mesin Pengering Hasil Pertanian Secara Konveksi dengan Elemen Pemanas Infrared Berbasis Mikrokontroler Arduino Uno dengan Sensor DS18B20,” J. Karya Ilm. Tek. Elektro, vol. 2, no. 3, pp. 16–20, 2017.

Kusumo, “Bab ii dasar teori 2.1,” Pengaruh Perlakuan Panas Dan Penuaan, pp. 5–18, 2017.

R. A. Utami, R. Fitria, R. Meiyanti, M. Ikhwani, and Z. Ardian, “Web-Based of The Regency Apparatus Work Unit Application at the Communications , Informatics , and Encryption Service of Bireuen Regency in Aceh Province,” vol. 2, no. 4, pp. 162–171, 2022.

D. M. Efendi Ibrahim Ashari Sotyohadi and K. Kunci-Pengering Buah Kopi Otomatis, “Seminar Hasil Elektro S1 ITN Malang Tahun Akademik Ganjil PERANCANGAN PROTOTIPE SISTEM PENGERING BUAH KOPI OTOMATIS BERBASIS ARDUINO,” 2018.

B. Widodo et al., “Rancang Bangun Pemanas Elektrik Produk Olahan Pertanian Berbasis Tubular Heater Element,” Sewagati, vol. 6, no. 3, pp. 1–6, 2022, doi: 10.12962/j26139960.v6i3.113.

B. Subiono and A. Sugiharto, “Rancang bangun prototipe mesin pengering kayu yang di kendalikan dengan mikrokontroler,” J. TeknoSAINS Seri Tek. Elektro, pp. 1–8, 2018.

Suryono, “Rancang Bangun Pengontrol Lampu Listrik Menggunakan Android dilengkapi dengan Saklar Manual,” Orbith, vol. 13, no. 2, pp. 74–80, 2017.

S. Afifudin, S. Supriyadi, and A. Burhanudin, “Rancang Bangun Pemanggang Ikan Model Oven,” Sci. Eng. Natl. Semin., vol. 5, no. Sens 5, pp. 151–157, 2020.

J. S Pasaribu, “Development of a Web Based Inventory Information System,” Int. J. Eng. Sci. Inf. Technol., vol. 1, no. 2, pp. 24–31, 2021, doi: 10.52088/ijesty.v1i2.51.

M. V. Hardiyansyah, “Rancang Bangun Sistem Kontrol Suhu Pada Mesin Oven Kopi Tray Rotary Berbasis Arduino,” J. Crankshaft, vol. 4, no. 1, pp. 67–76, 2021, doi: 10.24176/crankshaft.v4i1.5915.

R. Aulia, R. A. Fauzan, and I. Lubis, “Pengendalian Suhu Ruangan Menggunakan Menggunakan FAN dan DHT11 Berbasis Arduino,” CESS (Journal Comput. Eng. Syst. Sci., vol. 6, no. 1, p. 30, 2021, doi: 10.24114/cess.v6i1.21113.

Kartika, R. S. Julsam, Mulyadi, and Misriana, “Oven Otomatis Untuk Memanggang Kue Bolu Marmer Berbasis PID,” Proceding Semin. Nas. Politek. Negeri Lhokseumawe, vol. 3, no. 1, pp. 193–200, 2019.

M. Awasthi, A. Kumar, D. Kumar, and I. Jeet Pal, “Electric Power System Monitoring and Theft Detection using Power Line Communication,” Int. J. Eng. Sci. Inf. Technol., vol. 2, no. 2, pp. 79–85, 2022, doi: 10.52088/ijesty.v2i2.254.




DOI: https://doi.org/10.52088/ijesty.v3i1.405

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Yusril Fauzan, Kartika

International Journal of Engineering, Science and Information Technology (IJESTY) eISSN 2775-2674