Implementation Of Construction Safety Management System on The Building Project of Haji Hospital Of Surabaya

Muhammad Hoiri, M Ikhsan Setiawan, Diah Ayu Restuti Wulandari


Safety and accidents at work are the most serious thing to note, on building projects stroke center at Haji Hospital of Surabaya is still a lot of workers are less aware and less understanding about the safety and accidents caused due to neglect of the problem of workplace accidents. It is necessary to analyze the implementation of safety management system construction as well as the influence of the cost of the implementation of the project. This research method uses quantitative description based on the analysis about the application of the safety management system of construction on building projects stroke center Haji Hospital Surabaya, data collection through questionnaires (primary) which is distributed to 30 respondents consisting of the executive team (contractor), supervisory (MK) project and also some of the foreman of the workers, and observation and also documentation, where data is the results of the questionnaire were analyzed using the software IBM SPSS version 25, looking for the results of the multiple linear regression, T-test, an F-test. The results of linear regression analysis, T-test and F test obtained the value of T count > T table where X1 = 3,071, X2 = 5,5658, X6 = 3,006 and X7 = 3,560 and F count= 54,308 > F table = 2,46, the meaning that the variable of X1, X2, X6 and X7 are significant to application of safety management of the construction with the cost of implementation of construction projects


SMKK, Haji Hospital of Surabaya, Cost, SPSS

Full Text:



I. M., A. S.R., A. M., K. W.U., Y. N.A., and N. F.A., “Quantitative and qualitative assessment of musculoskeletal disorders and socioeconomic issues of workers of brick industry in Pakistan,†Int. J. Ind. Ergon., vol. 76, 2020.

C. Zervides, M. Sassi, P. Kefala-Karli, and L. Sassis, “Impact of COVID-19 pandemic on radiographers in the Republic of Cyprus. A questionnaire survey,†Radiography, vol. 27, no. 2, 2021, doi: 10.1016/j.radi.2020.10.004.

L. Louw and Q. Deacon, “Teaching Industrie 4.0 technologies in a learning factory through problem-based learning: Case study of a semi-automated robotic cell design,†Procedia Manuf., vol. 45, pp. 265–270, 2020, doi: 10.1016/j.promfg.2020.04.105.

B. Santoso and K. H. Hassan, “The protection of employment relationship in Indonesia,†Int. Bus. Manag., 2015, doi: 10.3923/ibm.2015.508.513., “Pencegahan Penyebaran Virus Covid-19 dengan Kerja di Rumah bagi ASN,† 2020.

X. Dong et al., “Eleven faces of coronavirus disease 2019,†Allergy Eur. J. Allergy Clin. Immunol., vol. 75, no. 7, 2020, doi: 10.1111/all.14289.

D. Abdullah, N. Hamir, N. M. Nor, K. Jayaraman, and A. M. M. Rostum, “Food quality, service quality, price fairness and restaurant re-patronage intention: The mediating role of customer satisfaction,†Int. J. Acad. Res. Bus. Soc. Sci., 2018, doi: 10.6007/IJARBSS/v8-i17/5226.

E. Wahyuni, D. Iranata, B. Suswanto, C. B. Nurcahyo, and W. Sutrisno, “Assessment of Vulnerable Buildings Due to Earthquake Loading Using Rapid Visual Screening Smartphone Application,†Int. J. Adv. Sci. Eng. Inf. Technol., 2018, doi: 10.18517/ijaseit.8.2.4336.

J. Swanata and M. ikhsan Setiawan, “Evaluation of Reservoir performance Clean Water Distribution in Putat Gede Graha Family,†J. World Conf., vol. 2, no. 1, 2019, doi: 10.29138/prd.v2i1.121.

D. Abdullah, Hartono, and C. I. Erliana, “Hesitant fuzzy-stochastic data envelopment analysis (Hf-sdea) model for benchmarking,†Int. J. Informatics Vis., vol. 5, no. 1, 2021, doi: 10.30630/joiv.5.1.405.

R. Ennis et al., “J p t e o,†J. Clean. Prod., 2018.

A. U. Ulya, E. Sutrisno, and I. W. Wardhana, “Perencanaan Sistem Drainase Berwawasan Lingkungan (Ekodrainase) di Kelurahan Sekaran Kecamatan Gunungpati Kota Semarang,†Tek. Lingkung., vol. 4, no. 1, 2015.


D. P. Restuputri, “Analisis Kecelakaan Kerja Dengan Menggunakan Metode Hazard and Operability Study ( Hazop ),†J. Ilm. Tek. Ind., 2015.

“ANALISIS FAKTOR-FAKTOR PENYEBAB KECELAKAAN KERJA KONSTRUKSI,†J. Tek. Sipil dan Perenc., 2007, doi: 10.15294/jtsp.v9i1.6918.

J. E. Ball et al., “Post-operative mortality, missed care and nurse staffing in nine countries: A cross-sectional study,†Int. J. Nurs. Stud., 2018, doi: 10.1016/j.ijnurstu.2017.08.004.


D. Sihombing, D. R. O. Walangitan, and P. A. K. Pratasis, “Implementasi Keselamatan Dan Kesehatan Kerja (K3) Pada Proyek Di Kota Bitung (Studi Kasus Proyek Pembangunan Pabrik Minyak Pt.Mns),†J. Sipil Statik, 2014.

R. Alfatiyah, “Analisis Manajemen Risiko Keselamatan dan Kesehatan Kerja dengan Menggunakan Metode HIRARC pada Pekerja Seksi Casting,†J. Mesin Teknol. (SINTEK Jurnal), 2017.

M. S. El-Mashaleh, S. M. Rababeh, and K. H. Hyari, “Utilizing data envelopment analysis to benchmark safety performance of construction contractors,†Int. J. Proj. Manag., 2010, doi: 10.1016/j.ijproman.2009.04.002.


Article Metrics

Abstract view : 29 times
PDF - 20 times


  • There are currently no refbacks.

Copyright (c) 2021 Muhammad Hoiri, M Ikhsan Setiawan, Diah Ayu Restuti Wulandari

International Journal of Engineering, Science and Information Technology (IJESTY) eISSN 2775-2674